diff --git a/2 - Reports/Gaspard_Le_Gouic.md b/2 - Reports/Gaspard_Le_Gouic.md
new file mode 100644
index 0000000000000000000000000000000000000000..f1b90350f48db72794b6109dd532e941e74cef7d
--- /dev/null
+++ b/2 - Reports/Gaspard_Le_Gouic.md	
@@ -0,0 +1,60 @@
+# HepiaLight 3 - Raspberry Pi Pico
+
+# Table des matières
+
+<!-- TOC -->
+
+- [HepiaLight 3 - Raspberry Pi Pico](#hepialight-3---raspberry-pi-pico)
+- [Table des matières](#table-des-mati%C3%A8res)
+- [Instruction & Description](#instruction--description)
+- [Mise en place de la communication](#mise-en-place-de-la-communication)
+    - [Branchements de la carte](#branchements-de-la-carte)
+    - [Upload du code](#upload-du-code)
+- [Travail](#travail)
+    - [Lundi, 17 Juin 2024](#lundi-17-juin-2024)
+    - [Mardi, 18 Juin 2024](#mardi-18-juin-2024)
+- [Creators](#creators)
+- [Copyright and license](#copyright-and-license)
+
+<!-- /TOC -->
+
+# Instruction & Description
+
+Ce projet consiste à concevoir une adaptation du projet HepiaLight 2 sur une nouvelle architecture afin de prouver son fonctionnement pour HepiaLight 3. Nous utiliserons un Raspberry Pi Pico ainsi qu'une matrice numérique avec des leds RGB adressables.
+
+# Mise en place de la communication
+
+## Branchements de la carte
+
+| **RPI Pico** | **NeoPixel NeoMatrix 8x8** |
+| :----------: | :------------------------: |
+|     3V3      |             5V             |
+|     GND      |            GND             |
+|    GPIO 0    |            DIN             |
+
+## Upload du code
+
+Après avoir uploader le bon Firmware sur le Raspberry Pi, comme indiqué [ici](https://www.raspberrypi.com/documentation/microcontrollers/micropython.html), nous pouvons utiliser le logiciel [Thonny](https://thonny.org/) afin d'uploader notre code.
+
+# Travail
+
+## Lundi, 17 Juin 2024
+
+- Lecture de documentation
+
+## Mardi, 18 Juin 2024
+
+- Mise en place de l'environnement de travail Thonny.
+- Upload du firmware sur la Raspberry Pi.
+- Aide à Michael pour l’implémentation du texte en mouvement
+- Tentative d’implémentation d'une lecture d'un capteur de température par I2C comme "proof of concept" pour l'ajout d'un accéléromètre -> Réussi à détecter le capteur mais pas à le lire.
+
+# Creators
+
+**Gaspard Le Gouic**
+
+- <https://gitedu.hesge.ch/gaspard.legouic>
+
+# Copyright and license
+
+Code and documentation copyright 2024 the authors. Code released under the [MIT License](https://gitedu.hesge.ch/michael.divia/hepialight3-pico/-/blob/94f8f25ac736165111a03ff964f1538a65eb40e3/LICENSE).
\ No newline at end of file