- Change petalinux kernel config to add missing drivers
- Move amba_pl to pl-user.dtsi
- Increase CMA buffer size from 16M to 32M

- Add Video write buffer driver to kernel config
- Add Xilinx MIPI CSI II driver to kernel config
- Move MIPI device tree from pl.dtsi to system-user.dtsi
- Remove IRQ controler IP

- uio0 on rgbled-ctrl
- remove uio usage in i2c1-test

- Update hardware description from scalp_firmware
- Add logs to i2c1-test program
- Remove uio compatibility for EMIO in device tree
- Remove PCAM5C compatibility for I2C1 in device tree

Update PetaLinux firmwares scalp_safe_petalinux and scalp_user_petalinux. Update of the documentation contained in the README.md file.

Added version 0.4.3 of the safe firmware with U-Boot script. Added a utility to produce the EXT4 file system for the SD card with the user firmware. Added user firmware. Updated README.md file.

Version 0.4.1 of the firmware PetaLinux scalp_safe_petalinux with UBI/UBIFS support + 1Gb Eth support + BSP v0.4.1 + updated README.md.

Version 0.4.1 of the firmware PetaLinux scalp_safe_petalinux with UBI/UBIFS support + 1Gb Eth support + BSP v0.4.1.

Transitional version of PetaLinux for the scalp_safe_petalinux firmware with UBI/UBIFS support for rootfs, datafs and U-Boot env.

Version 0.3 of the PetaLinux scalp_safe_firmware BSP. Modified the sja1105-init initialization script and added a sja1105-conf script, which is in charge of configuring the sja1105 ethernet switch.

PetaLinux scalp_safe_petalinux project in debug version about the switch sja1105.  Transitional commitment.