Add SCALP node vivado board files

board_files/README.md

+# Vivado board files for SCALP boards
+
+The ```scalp_node``` folder can be copied into ```<Vivado directory>/<version>/data/boards/board_files``` to add SCALP node support in Vivado. The definition ```"hepia-cores.ch:scalp_node:part0:0.1"``` can then be used as a proper board definition for project creation. This board definition is currently blank and does not provide full board definition but it will evolve in the future and should be used for new project creation.

board_files/scalp_node/0.1/board.xml

+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<board schema_version="2.1" vendor="hepia-cores.ch" name="scalp_node" display_name="SCALP node" url="https://gitedu.hesge.ch/soma/scalp_board/-/wikis/pcb/scalp_mainboard">
+  <images>
+    <image name="SCALP_board.jpg" display_name="SCALP BOARD" sub_type="board">
+      <description>SCALP Board File Image</description>
+    </image>
+  </images>
+  <compatible_board_revisions>
+    <revision id="1">B</revision>
+  </compatible_board_revisions>
+  <file_version>0.1</file_version>
+  <description>SCALP: Self-configurable 3-D Cellular multi-FPGA Adaptive Platform</description>
+  <components>
+    <component name="part0" display_name="SCALP Zynq7015 FPGA" type="fpga" part_name="xc7z015clg485-2" pin_map_file="part0_pins.xml" vendor="xilinx" spec_url="https://gitedu.hesge.ch/soma/scalp_board/-/wikis/home">
+      <interfaces>
+        <interface mode="master" name="ps7_fixedio" type="xilinx.com:display_processing_system7:fixedio_rtl:1.0" of_component="ps7_fixedio" preset_proc="ps7_preset">
+        </interface>
+      </interfaces>
+    </component>
+    <component name="ps7_fixedio" display_name="ps7_fixedio" type="chip" sub_type="fixed_io" major_group=""/>
+  </components>
+  <jtag_chains>
+    <jtag_chain name="chain1">
+      <position name="0" component="part0"/>
+    </jtag_chain>
+  </jtag_chains>
+  <connections>
+  </connections>
+</board>

board_files/scalp_node/0.1/changelog.txt

+0.1
+Initial public release
+

board_files/scalp_node/0.1/part0_pins.xml

+<?xml version="1.0" encoding="UTF-8" standalone="no"?> 
+<part_info part_name="xc7z015clg485-2">
+<pins>
+</pins>
+</part_info>